Sani-Foam Cleanser - Green Rhino

A foaming chlorine-based (Hypochlorite) cleaner and sanitizer. To be used with or without a foam gun to clean and sanitize large areas. Best results are achieved when applied through an automatic dilution control with foaming equipment. If used manually then Sani-foam Cleaner should be used with extreme care.

FOR PROFESSIONAL USE ONLY.

DIRECTIONS: Connect to foaming unit and adjust air/water pressure and detergent feed until the desired foam density is achieved. Cover surfaces and equipment with foam and allow 5-10 minutes for a full sanitizing process to take effect. For manually cleaning use at 1-2% solution. After use, food contact surfaces must be thoroughly rinsed with potable water before production starts.

WARNING: Causes severe skin burns and eye damage. Wear protective clothing.

CAUTION: CLASS 8 HYPOCHLORITE SOLUTION